As a core material in furniture manufacturing and interior decoration, Medium Density Fiberboard (MDF board) is favored for its smooth surface and workability. However, proper maintenance is key to ensuring MDF boards maintain performance over the long term. Linyi Hexing International Trading Co., Ltd. compiles professional maintenance tips based on 15 years of panel production experience:
1. Daily Cleaning: Gentle Operation as the Foundation
Although MDF board surfaces are veneered, water absorption remains a concern. For daily cleaning, use a slightly damp soft cloth to wipe along the grain-avoid rough rags or steel wool to prevent surface scratches. For coffee, ink, or other stains, immediately press with a damp cloth to absorb the spill; never rub forcefully. For stubborn stains, dilute a neutral cleaner (pH 7-8) before use, and dry the surface with a cloth afterward to prevent edge swelling from moisture absorption.
2. Moisture Prevention & Anti-Deformation: Environmental Control as the Core
MDF boards are vulnerable to deformation from moisture. Installation recommendations include:
Ensure the wall base is dry (moisture content <12%). In humid areas like kitchens or bathrooms, use waterproof MDF boards (e.g., Hexing International's moisture-proof series with ≤6% moisture content);
Maintain indoor humidity at 40%-60%. Use a dehumidifier in humid seasons, keep boards 10-15cm above the ground to avoid direct contact;
If slight edge swelling occurs, remove the moisture source immediately and air-dry with a fan on low speed. Never expose to direct sunlight or bake, as this may cause cracking.
3. Repair & Maintenance: Secrets to Extending Service Life
Surface scratch repair: For shallow scratches, sand lightly with fine-grit sandpaper (2000 grit) and apply matching wood wax oil. For deep scratches, fill with specialized putty, sand smooth after drying, then repaint;
Edge protection: Wrap edges with corner protectors when moving furniture to avoid chipping from collisions;
Regular maintenance: Apply furniture wax or liquid wax 1-2 times annually to form a protective film and enhance stain resistance.
With Hexing International's E0-grade eco-friendly MDF boards as the quality foundation, combined with scientific maintenance, service life can be extended by over 30%. For customized moisture-proof, flame-retardant, or other functional MDF boards, contact us for professional solutions.